TPA3110D2 - Усилители низкой частоты


Texas Instruments
Нет в наличии

The TPA3110D2PWP is a 15W Stereo Filter-free Class-D Audio Power Amplifier with SpeakerGuard™ for driving bridged-tied stereo speakers. Advanced EMI suppression technology enables the use of inexpensive ferrite bead filters at the outputs while meeting EMC requirements. SpeakerGuard™ speaker protection circuitry includes an adjustable power limiter and a DC detection circuit. The adjustable power limiter allows the user to set a "virtual" voltage rail lower than the chip supply to limit the amount of current through the speaker. The DC detect circuit measures the frequency and amplitude of the PWM signal and shuts off the output stage if the input capacitors are damaged or shorts exist on the inputs. The TPA3110D2 can drive stereo speakers as low as 4R. The high efficiency 90% eliminates the need for an external heat sink when playing music. The outputs are also fully protected against shorts to GND, VCC and output-to-output.

• 15W/ch into an 8R loads at 10% THD+N from a 16V supply

• 10W/ch into 8R loads at 10% THD+N from a 13V supply

• 30W into a 4R mono load at 10% THD+N from a 16V supply

• 90% Efficient class-D operation eliminates need for heat sinks

• Filter-free operation

• SpeakerGuard™ speaker protection includes adjustable power limiter plus DC protection

• Flow through pin out facilitates easy board layout

• Robust pin-to-pin short-circuit protection and thermal protection with auto recovery option

• Excellent THD+N/pop-free performance

• Four selectable, fixed gain settings

• Differential inputs

• Green product and no Sb/Br



Выходная мощность:
Класс D
Количество каналов усиления:

Datasheet (tpa3110d2.pdf, 1,877 Kb) [Скачать]